Monday, July 23, 2012


 THE OLD HOUSE DOCTOR 11-24-02

TRIX OLD AND NEW

          People who have worked on (or lived in) old houses have seen a lot of tricks to make the hideous appear, well, less hideous. Just look around YOUR old house. Do you have flattened tin cans nailed over holes in the floor? Of course you do, and some of you are darn proud of it. Ever pulled off a piece of trim to find ancient newspapers filling the void behind it? I have. ‘Insulation of the worst sort, it is’, as Yoda would croak. It might keep out the “draffs”, but it feeds the termites and mices. Steel wool, chewing gum, wads of tape, all have been used to seal the cold wind out. Usually in a pinch, when you’re drinking coffee on a lazy Sunday morning and the cold wind inside your house just gets to be too much.

          I have found toothpaste filling wall holes (this is one you renters [and yes, you too, Barbara]) have used for years. Works great on white walls. Just don’t try it with the blue or red stuff. I’ve personally used corks to fill round holes in floors, and will readily attest to its efficacy. I can’t tell you how often I’ve found scraps of glass covering window holes, artfully attached with scotch tape.

          Most people would patch cracks and voids in plaster with setting-type joint compound, followed by paper tape and drywall mud. Floated to a thin line, of course. Many, though, would rather stick a piece of duct tape over the crack, and, if they were feeling especially energetic, splash some paint on top of it. Hopefully it matches. It’s not exactly the kind of repair I would make, but I don’t care what you do. It looks good from my house. And makes for a good laugh later on.

          There are lines that, when crossed, make things go awry. Use just any old chunk of scrap wood to shim that porch joist, and you may pay for it with a swayed floor. Use pressure treated wood for any foundation-to-structure shim. Filling old mortar joints with “Quickcrete” might work for a while, but the hard mortar might very well cause the softer brick to flake and crack as the years go by. Then where would you be? Probably hiding in your ramshackle house, watching reruns of “Love Boat” and sucking the filling from maple doughnuts while you take down license numbers of illegally parked cars.

          Oh, yes, precious. You KNOW who you are. And so does everyone else.

Monday, July 16, 2012


                       THE OLD HOUSE DOCTOR 1-11-04



FIX YOUR OWN DAMN WATER HEATER



Dear Old House Doctor,

            My water heater has stopped heating water. Could it be the electrical connection? What in the world can I do?

            Signed

            Filthy From Not Bathing

           



Dear Filthy,

            I hold my nose as I answer. Your electric water heater is suffering from Lime-o-nitis. It has built up so much lime that the lower element has burned out. As you say, What can you do?

            You could smoke a couple of bongs and go into the woods to burn a circle, but praying does little for electric water heaters. I know, because God told me that she wants you to use natural gas.

            Okay, I’ll tell you how to rejuvenate your electric water heater, but you’d better be prepared to work at it. Otherwise you need to shell out up to four hundred bucks for a new one, and I know you have more bongs to do, so bear with me for a couple of weeks whilst I explain this.

            Electric water heaters heat water using an element that comes in contact with the water itself, as opposed to gas heaters that use flames to heat the tank. With me so far? Good. The water around here has a lot of lime in it (calcium carbonate to you cavers), and the action of heating causes oxidation, which coats your heating elements with a hard white scale. This eventually causes the element to burn out. Don’t axe me why, it just DOES.

            Your electric water heater has two elements; one halfway up the tank, and one at the bottom. The bottom element does the lion’s share of the work, and is the first to burn out. HINT; if you replace one, replace the other! Labor is the main expense in any construction project, unless you build with gold or platinum. Anyway, you don’t need to toss the whole thing. A couple of hours work will make your electric water heater last nearly forever. Trouble is, you need to do this every other year.

            Do WHAT?, you axe. Unh-unh-unh. You gotta wait til necks time. Cold showers for you, you dweeb.

          THE OLD HOUSE DOCTOR 2-9-04



ELECTRIC WATER HEATER REPAIR II



            In our last episode, we discussed why the lime in your water burns out water heater elements. Now I’m going to tell you what to do about it.

            Find the breaker for the water heater and turn it OFF to keep you from dying. THIS IS EXTREMELY IMPORTANT.

 Turn the cold water to the heater off. Connect a hose to the drain valve at the bottom of the tank and open it, then SLOWLY lift the lever to open the pressure relief valve (it’s near the top of the tank). Don’t scald yourself. This will drain the thing. If you can’t find these things, you are either incompetent or unlucky, and should call a plumber. Or a psychic.

            You should already have picked up an element wrench (six bucks at the plumbing supply). Remove the element cover at the bottom of the tank and disconnect the two wires. You already threw the breaker, RIGHT? The tank has drained, HASN’T IT? Place the element wrench over the nut and turn it left (lefty loosey / righty tighty). Once it is loose, try to pull it out of the hole (oh my!). If it’s stuck, it is probably because the element has a lot of scale, or is shaped like a doubled-up U. Use a large screwdriver to knock off the scale and to compress the ends of the element together. Do this by using the edge of the hole as a fulcrum. This may take some work, but keep at it, using a flashlight to see what your doing. Do the same thing to remove the upper element.

            Once the element is out, take it to the plumbing supply and get another; make sure to get the same type, as they have two different thread sizes.

            Then do the whole thing in reverse order. Close the drain but not the pressure relief valve, and turn on the cold water. Once full, water will try to come out the P.R.valve; close it and go to your upstairs sink, turning on the hot water to drain the air out of the system. If you don’t, the trapped air will burn out your new elements.

            Next time: Removing the Remaining Lime! A trade secret.





              THE OLD HOUSE DOCTOR 2-23-04




ENOUGH WITH THE WATER HEATERS AWREDDY





            I know that I told you how to replace your electric water heater’s elements last time, but I want you to go back in time so you can clean it out while it’s empty. Just go to www.gobackintime.com  to find out how.

            You’ve successfully wrested the lime-encrusted elements from their holes and your last (and most important) task is to clean out the lime that fills the bottom of the tank. If you don’t, the lime granules will breed new lime on your elements, and then where would you be? Snurfling for crusted gum on the bottoms of bus benches, I bet.

            Borrow a friend’s shop-vac, get some duct tape and a two-foot section of the largest diameter garden hose you can find. Make a long handled scoop that will fit through the element hole and reach the other side of the tank (I prefer a cheap camping ladle with the spoon ground down). Use a flashlight to check your progress as you scrape the lime granules towards the front of the tank.

            Lime that gathers at the bottom of the tank is not solid; it fell off the elements. These granules are easily moved to the front of the tank, where you can vacuum them out with the piece of garden hose you duct-taped onto the shop-vac hose. Your piece of garden hose will clog almost immediately, and squeezing the hose firmly (oh my!) to break up the clogs will be a constant task. The lime is crushed easily, and though this task of scooping, vacuuming, crushing and peering with your flashlight seems monotonous, the boredom can be assuaged with regular doses of fine tequila.

            The whole process may take a half an hour or so, but keep at it until the bottom of the tank is completely clean and your vacuum weighs more than your Saint Bernard. Squeezing the hose constantly is the key, and letting the vacuum rest occasionally will keep it from burning up, as stepping down the hose size makes it work harder. Then go to www.goforwardintime.com to find your job done and your hot bath waiting.

Friday, July 13, 2012


THE OLD HOUSE DOCTOR 10-11-04
POTENT PRESERVATION POTABLES

          An old house dweller (OHD) has many tools in the household kit; vise-grips, duct tape and WD-40 are always within easy reach at my house. If it moves, and it shouldn’t, use duct tape. If it should move and doesn’t, you’ve got WD-40. And almost everything else can be crimped, loosened, tightened or whacked with a pair of regular-duty vise-grips.

And no old-house-dweller worth their salt would be without the necessary tool kit for internal adjustments; I refer, of course, to a well-stocked liquor cabinet. All suggestions are for après labor, of course.

          Got a water heater to replace? Or a refrigerator with which you’d like to decorate your porch?? Beer and sangria are the professionals’ choice for such a task. Easy on the brain, no falling down. I recommend Rolling Rock and Yago.

          Up on ladders? Using power tools? Stay off the booze, friends, until you stop. Then a nice vodka and tonic in summer or hot buttered rum in winter can round out the day. Don’t waste the Belvedere on mixed drinks, though; stick with Gilbey’s.

          Just bought yourself an old house? You fool. Take a few slugs of cheap whiskey, because you won’t be able to afford anything else for the next decade or two.

          Just sold your old house for a profit? Congratulate yourself with a bottle of Moet and Chandon champagne. If you plan to buy a new, maintenance-free log cabin, buy a case.

          For nasty plumbing problems that require crawling around in the sewage that leaked out your water closet drain, only tequila will take that taste away. I just love the quaint term “water closet,” don’t you? It brings up visions of turn-of the-century hotels with Brett Maverick in the bar downstairs. Drinking Don Eduardo anejo, no doubt.

          For masonry problems, especially those that cause your home to slide downhill, the fashionable OHD turns to gin martinis. Just one word; Beefeater.

          Need a new roof? An entire rewiring in order? Building inspector sent you a fax that’s on its eighteenth page? The hell with it. Absinthe is the drink for you. A little wormwood goes a long way!

OLD HOUSE DOCTOR 1-21-02

HOME SELF-EXAM

PART 1

          Now that Grandpa has been sent back to the future (did I hear a collective sigh of relief?), we can get back to keeping up with your home’s health. I’m going to teach you to perform a seasonal home self-exam so that when Cletis the Plumber or Jayfus the Roofer comes to you with a repair bid, you’ll have some foreknowledge of its details. You might even be able to head off those guys, if you do this twice a year. Catch the smaller problems BEFORE they turn into monsters.

          Your home’s greatest enemies are time, moisture and yourself, though not necessarily in this order. And as every GUY knows (can I get a group HARUMPH?), worming around your crawlspace is the best indicator of a home’s health. There isn’t a guy in the world that can truly resist an old house’s spider-infested basement. Well, only a few, but they’re dead. But I’m sure it’s not from spider bites. Put on your overalls, we’re goin’ underground.

          The crawl should be DRY. Covering the dirt with clear plastic will keep the moisture away. The masonry piers that support the floor joists toward the center of the house should make full contact, be plumb (straight), and the mortar should be solid. If not, add shims and repoint. Any water or gas pipes need to be off the ground, as should those electric lines. Attach them all to the floor joists with proper hangers and staples. Chewed-on electric cable can be wrapped with electric tape IF no more than one of the wires has been exposed, but it’s best to get Elmo the Electrician to do it. That way I won’t get sued. Examine the areas below the bath and kitchen for leaks or wet wood. Are there pinholes throughout your joists? You may have boring beetles, though they don’t like to be called that. Poke your wood with an awl or screwdriver to test its integrity around termite damage. Look for moist mud tunnels around piers and masonry. You might have active termites. If so, call Porky the Pest Guy.

          I’ll be giving a talk on Home Self-Exams Thursday January 24th (hey, that’s tonight!) at 7 PM at The Community Room on the Square in Berryville. Y’all come.

         

         
THE OLD HOUSE DOCTOR 2-9-02

KNOW YOUR HOME’S HEALTH

PART TWO

          Last time, we talked about your crawlspace, and how it is a gauge of your home’s health. You put on overalls and wormed around with a flashlight, looking for telltale signs of rot such as colonies of glowing fungi shaped like Newt Gingrich. You cursed the fact that you even read this stupid column, and doubly cursed that you’re gullible enough to actually TRY this stuff. Well, keep those overalls on, because we’re going up top now.

          Your attic has the top job (HaHa) of your home’s components: to keep the rain away from the structure. Once up there, turn off your flashlight and look for the light coming through the cracks. Never mind that the spiders have moved closer to you in the dark. Cracks of light near the eaves are natural in old homes, unless they can admit squirrels. Patch them with hardware cloth if you see squirrel sign such as plant material or droppings.

          Another visitor is the bat. They like your roof’s tight spots in the peak, and, unless they are in numbers, pose no great risk. Their droppings, though, can cause respiratory problems, so bring a dust mask with you. Do not harm them, it is illegal and VERY bad karma.

          That mask might also keep you from breathing the fiberglass insulation fibers in the air. Old houses NEED as much insulation as they can get, and the standard 3 ½ inches isn’t half enough. Insulating your roof rafters is a no-no: the heat trapped between the insulation and the shingles will cut your roof’s longevity in half unless a ventilated air space is provided.

          Look at the roof joints, especially around vent and chimneys that penetrate the roof decking. Black streaks indicate a leak, but if it is dry during rain, it is a past leak. Touch the area to make sure it’s dry. Examine the underside of the ridge as well. Most leaks can be stopped with an application of cold-process roofing tar or silicone. No, it must be applied OUTSIDE the attic.

          Check your A/C ducts for leaks, your electrical wires for chewed areas. Seal either with the proper tape. If TWO adjacent wires are exposed, call Elmo the Electrician.